- Product temporarily out of stock
- Immediately from our warehouse (Aawee Jämsä)The product will be sent in 1-3 days
High-Quality Meadow Creek Mounts Red Dot Sight Base for Shotgun Rails
Attaches with 4 screws to the ventilation of the shotgun rail using a 32mm long and 2.0mm thick steel mounting plate.
Also available with a 1.2mm thick mount plate, which requires a minimum 22mm long slot in the rail.
The sight mounting surface is just 3mm above the rail.
Compatible with sights:
Holosun 407c - 507c - 508T
Trijicon RMR - SRO
Sight mounting with 6-32 unc screws.
Ensure that the screws used for mounting the sight are of sufficient length and the correct thread type.
Fits max. 9.8mm wide shotgun rail without adapter blocks.
Included: Sight base, mounting plate, mounting screws, hex key, thread locker, and adapter blocks for max. 5.6mm, 6.2mm, 6.6mm, 7.2mm, 7.6mm, 8.2mm rails. A rail slightly narrower than the adapter block is acceptable.
Manufacturer: Meadow Creek Mounts USA.
