- Product Code: CE061C
- Caliber: 9x19mm
Canik METE SFT Pro Black is an Optics Ready pistol equipped with Canik's METE frame and a 5"/127mm threaded barrel. SRA, IPSC Standard, IDPA SSP / ESP / Carry Optics
The slide of the firearm is Optics Ready. It allows the attachment of Trijicon RMRcc / Shield RMS/RMSc or Holosun 407K / 507K red dot sights. Unlike other Canik models that are Optics Ready, in METE series firearms the rear sight remains in place when a red dot sight is installed. Therefore, the red dot mounts familiar from other Canik models are not used; they do not fit in front of the firearm's rear sight. The Holosun 407K / 507K red dot is sufficiently small to fit between the firearm's ejection port and the rear sight, and it can also be mounted low enough to allow the use of the firearm's own iron sights while the red dot sight is attached.
The Mete SFT Pro series is available with a 5.00 inch / 127mm barrel. It features an aggressively cut slide that not only enhances style but also makes the slide much easier to handle.
Another noticeable upgrade is the chromed, serrated M13.5x1 LH threaded barrel for suppressors.
The world-renowned Canik trigger. The Pro series is designed for the demanding shooter who needs to perform at peak levels.
Features:
- Short reset
- Chromed threaded barrel with serrations
- NEW Holster Fit-and-Lock (HFL) mounting system
- NEW Easy In/Easy Out push pins and modular disassembly
- NEW Ergonomically redesigned beavertail
- NEW Integrated flared magwell
- NEW rear sight allows one-handed emergency manipulation
- NEW Co-Witness optic readiness
- NEW Optic readiness compatible with Trijicon RMRcc and Shield RMS/RMSc footprint sights
- NEW Low-profile ambidextrous slide release
- Aggressive front serrations/cuts on the slide
- 1913 Picatinny rail in front of the trigger guard
- Loaded chamber indicator
Side reversible magazine release with interchangeable release buttons and alternative backstrap panels.
Includes a hard case, two standard magazines (20+18 rounds), magazine EZ loader, Speed magwell, an extra backstrap, two optic plates, a reversible IWB/OWB holster, tool kit, cleaning kit, gun lock, and manual.
| MODEL | CALIBER/MAGAZINE CAPACITY | ACTION TYPE | MEASUREMENTS (mm-inch) | WEIGHT (g-oz) | OTHER | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 9mm | .40S&W | DA/SA | SAO | LENGTH | HEIGHT | WIDTH | BARREL LENGTH | WITH EMPTY MAG | ACCESSORY RAIL | FULLY AMBI | |||||||||||||||||||||||||||||||||||||
| METE SFx | 18-20 rounds | N/A | * | 210.5 mm | 8.29” | 145mm | 5.70” | 36mm | 1.41” | 132mm | 5.2” | 832g | 0.14oz | * | Slide Stop Lever, Magazine Catch | ||||||||||||||||||||||||||||||||
| METE SFT | 18-20 rounds | N/A | * | 192mm | 7.56” | 145mm | 5.70” | 36mm | 1.41” | 113.5mm | 4.46" | 789g | 0.14oz | * | Slide Stop Lever, Magazine Catch | ||||||||||||||||||||||||||||||||
| METE SFT PRO | 18-20 rounds | N/A | 206.5 mm | 8.12" | 146 mm | 5.74" | 38 mm | 1.5" | 127mm | 5.0" | 828 g | 1.82 lb | |||||||||||||||||||||||||||||||||||
| METE SFX PRO | 18-20 rounds | N/A | 225.5 mm | 8.87" | 146 mm | 5.74" | 38 mm | 1.5" | 146 mm | 5.74" | 876 g | 1.88 lb | |||||||||||||||||||||||||||||||||||
| Product | |
| Service and delivery |
| Product | |
| Service and delivery |
| Product | |
| Service and delivery |
